Wurth ICS-100596 CAN INTERFACE 48P New Configurable Controller, Warranty

NEW.....Wurth Elektronik ICCS Can Interface/Controller. Unprogrammed.

With up to 24 x 2 A outputs, the ICCS CAN Interface 48P covers a wide range of possibilities and is particularly suitable for applications in mobile machines and commercial vehicles. The high number of configurable inputs and outputs also makes it the perfect module for extending an existing CAN network. These graphically programmable controllers can be used as a stand-alone solution or for PCB mounting.

Applications
• Control unit for power distribution
• Monitoring of fuses and switching of relay
• Input and output extensions for CAN bus systems
• Connection of binary and analogue sensors via the CAN bus

General information
Housing Transparent
Connector 3 x Molex Mini Fit 16 Ways
Dimensions 76 x 116 x 15 mm
Weight ~155 g
Operating temperature -40 °C to 85 °C (no full load at 85 °C)
Storage temperature -40 °C to 85 °C
Ingress protection IP 54
EMC E1
Operating voltage 9 to 30 V DC
Pre-fusing 10 A / Supply block
Current consumption max 40 mA
Sleep mode consumption 500 μA
Processor type Freescale HCS08
Clock frequency 40 MHz
Flash memory 60 kB (48P) / 128 kB (48P+)
RAM 4 kB (48P) / 8 kB (48P+)
EEPROM 1 kB available for graphical programming
CAN Bus
acc. ISO 11898-5 High speed wake on CAN
acc. CAN 2.0 B 29 Bits extended address identifier
acc. CAN 2.0 A 11 Bits address identifier
Baud rate 20 kBit/s to 1000 kBit/s
(250 kBit/s default value)
Inputs / outputs details
Analogue inputs
Input voltage max Vsupply
Measuring range 0–11.034 V DC
Resolution 12 bits
Input resistance 220.68 kΩ
Refresh rate max 120 ms (with cycle time 10 ms)
Digital inputs
Input voltage 0 V DC to Vsupply
Switch-on level 7 V DC
Switch-off level 4 V DC
Input resistance 22.68 kΩ
Digital outputs High side
Load current max 2 A diagnostic current sense
PWM outputs
PWM frequency max 1 kHz
Duty cycle 0 to 100 %
Resolution 0.1 %
Load current max 1 A